Fall Bright
10110 Hyatt Hill, Dundee,
NY 14837 (near Wayne) 607-292-3995 Coordinates:
42.490863, -77.117778
| ||||||||
|
www.101winemaking.com |
|||
|
Winemaking and Brewing
Supplies Online and In-store |
|||
|
1. Rack your wine even if it is still fermenting. If the smell hasn't disappeared in 24 hours, rack again. Aerate and splash about. 2.
Dose the wine with the recommended amount of a yeast nutrient. If
you have Reduless, use that for the nutrient at this
point.
100-150 ppm 10-15 g/hL
0.83-1.25 lb/1000 gal Dissolve Reduless in 10 times its weight in water. Add immediately to tank mixing well. If prepared in advance, re-suspend the product prior to its addition. Additions can be made during pump-overs or during tank agitations/mixings. Recommended contact time is 48-72 hours after homogenization. Rack off or filter the wine when treatment is complete. 4. Reduless can be dosed twice, if the first dosage improves but does not clear up the problem. 3. You may also bubble an inert gas such as carbon dioxide or nitrogen through the wine. 4. If the above steps do not correct the problem then Copper Sulfate is a serious consideration. REDULESS in stock Reduces sulfur defects CHARACTERISTICS Reduless is a new, proprietary formulation of inactivated yeast developed by Lallemand to improve the overall quality of both red and white wines. Its formulation is naturally rich in copper, making it a useful option to decrease H 2S, dimethyl sulfide and other sulfur defects. Reduless helps increase roundness and smoothness and can decrease phenol related defects. Grape varieties prone to negative sulfur compounds (such as Syrah, Pinot Noir, and Chardonnay) particularly benefit when treated with it.Recommended contact time is 72 hours. RECOMMENDED DOSAGE 100-150 ppm 10-15 g/hL
0.83-1.25 lb/1000 gal DIRECTIONS FOR USE Dissolve Reduless in 10 times its weight in water. Add immediately to tank. If prepared in advance, re-suspend the product prior to its addition. Additions can be made during pump-overs or during tank agitations/mixings. Recommended contact time is 48-72 hours after homogenization. Rack off or filter the wine when treatment is complete. REDULESS MAY BE DOSED AGAIN FOR TREATMENT FOR HYDROGEN SULFIDE. Maximum potential copper contribution when used according to recommendation is 0.02ppm
|
|
Fall Bright Thank you for visiting our web site! Copyright 2000 Fall Bright All rights reserved. |
and Check out